Treadnought Hybrid Nurse Call System Floor Sensor Mat
It's not possible to constantly stay by the side of a patient or relative that's at risk of falling, or prone to wandering around. To keep them safe, the Treadnought Hybrid Nurse Call System Floor Sensor Mat detects if there's weight on the mat and alerts the caregiver. Place it in a useful spot like a bedside or doorway, so you can be notified immediately in case your patient falls or has gone walkabout and may be vulnerable.
The sensor mat is a hybrid of wired and wireless systems - it can be made wireless when used in combination with the Fall Savers Wireless Floor Pad Transmitter and Fall Savers Wireless Fall Prevention Monitor.
What's Included?
- 1 x Fall Savers Sensor Mat
- 1 x Pigtail connection lead (preferred type should be selected from the drop-down menu above)
How Does the Treadnought Mat Detect Falls or Wandering?
The Treadnought Nurse Call System Floor Sensor Mat is activated when a patient steps onto the mat or applies pressure to it. This sensor mat is compatible with most call systems. When plugged into a nurse call system or alarm monitor, the Treadnought Nurse Call System Floor Sensor Mat provides a safe, hard-wearing and versatile solution to falls prevention challenges.
Durable and Built to Last
Floor mats can be an expensive repeat purchase for care homes, hospitals and other facilities where falls prevention is of great importance. The Treadnought Nurse Call System Floor Sensor Mat outlasts other floor mats because of its quality of construction and rugged, durable surface, providing superb value for money.
Where Can I Place the Fall Sensor Mat?
On carpeted surfaces, the Treadnought Nurse Call System Floor Sensor Mat can be placed directly onto the floor and connected to your existing system for immediate wander alerts. An optional Anti-Slip Mesh Mat can be purchased if the floor mat is being placed on a hard surface, such as tiles or lino, to prevent migration of the mat.
How Do I Use the Treadnought Mat Wirelessly?
If you prefer to use this mat wirelessly, up to two mats at once can be easily connected to eliminate tripping hazards and make the system more user-friendly. To use the system wirelessly, you will need the following components. The Transmitter and Monitor can be added to your order using the tick boxes near the top of this page.
Full Nurse Call System Compatibility
This Floor Sensor Mat is designed to work in as many facilities as possible, and is compatible with most nurse call systems. Multiple pigtail connection types are available, which can be selected from the drop-down menu at the top of the page.
From left to right, the connection types in the image above are listed below (the top left of the image shows the male/female pigtail connection via which each of these plugs connects to the Treadnought Mat)
- Leftmost: 4-Pin RJ9 - MED4 (TN05)
- Second from Left: 6-Pin RJ12 - MED6 (TN06)
- Middle: REV BT (TN08)
- Second from Right: Stereo Jack (TN03)
- Rightmost: Mono Jack (TN02)
Safe and Hygienic
Hygiene is a central concern in any medical environment, and this mat has been designed with this in mind. It is made with antibacterial materials, reducing the risk of contamination or spread of infection. It is easily cleaned with a vinyl-tolerant cleaning solution, though it should not be completely immersed in liquid.
Mat Dimensions
The dimensions of the Treadnought Nurse Call System Floor Sensor Mat are 91 x 61cm. This will cover a large enough area to avoid overstepping, and will fit into the vast majority of bedroom environments.
Dimensions and Specifications
- Dimensions (LxWxD): 600 x 900 x 7mm
- Minimum weight to trigger alert: 2kg
